How to use the refueling gun?

How to use the refueling gun?

The instructions for a refueling gun are no different from those for a water pistol, except for a slightly different trigger.

1. Drive the car to the tanker with a specific oil number, then park the car and stop the fire and power off.

2. Select the corresponding payment method, insert the card into the slot with the refueling card, select the corresponding refueling method, fix the limit or fix the remaining oil, or fill the tank with oil.

3. After entering the corresponding refueling mark value, you can remove the refueling gun in the refueling machine, and then insert it into the tank port. After pulling the trigger, you can carry out the refueling.

4. After the tank is full or filled with the fixed limit/remaining oil, the refueling gun will jump by itself. At this time, the refueling gun will be removed, the oil tank cap will be tightly covered, and the refueling gun will be put back into the refueling machine to carry out liquidation.

In particular, there are inductors on the refueling gun. If too much oil causes the spray of gasoline and diesel, it will make the refueling gun jump gun stop refueling. At this time, the trigger must be pulled again.